Home Life 9 Ways on How to Fix Water Pressure in Shower

9 Ways on How to Fix Water Pressure in Shower

0

Low water pressure in the shower is a drag. Offering nothing but a poor start to your day, inadequate water pressure can lead to struggles to properly remove soap or having to deal with water cooling down before it reaches your body.

Thankfully, there are a few easy steps you can take to improve water pressure in the shower and enhance the flow of water. If you want to understand how to fix water pressure in shower, here are nine possible solutions that you can try:

1. Give your showerhead a good clean

It is natural for sediment to build up in your showerhead over time. Remember that all water carries minerals and they therefore cause clogging over time. In order to clean your showerhead effectively, simply unscrew it from the attachment and let it soak in a bowl of vinegar for at least eight hours. Once it has had time to adequately soak, use a toothpick to gently press out any remaining particles.

2. Can’t remove your showerhead?

One of the obstacles for how to fix water pressure in shower is that you can’t remove your showerhead. In these instances, you can still follow the same procedure, you’re just going to need a rubber band and a sandwich bag. Simply fill the sandwich bag with vinegar and use the rubber band to attach the bag to the showerhead. Allow the same amount of time to soak, this should help remove the limescale and break down some of the sediment.

3. Try removing the flow regulator

If you tried cleaning your showerhead and water pressure still hasn’t improved, you can try removing the flow regulator. To do this, first detach the showerhead from the wall and then take a look inside it. If you see a rubber gasket and mesh filter screen inside, pull them out and look for a plastic disk with a hole in it. Then you can use a pair of tweezers or a paper clip to pull it out. Finally, put the filter screen and gasket back in to reassemble the showerhead.

4. If removal isn’t possible, widen the opening

If removing the regulator altogether is adding too much pressure or causing the showerhead to spray sporadically, you have another option. You can use a drill to widen the open slightly, or according to how much pressure you want to create. The wider the opening is, the more water that will flow through and an increase in pressure will result.

5. Replace your water-restricting showerhead

In some cases, pressure may be significantly deceased by the fact that you have a water-restricting showerhead. If so, you might need to get a different showerhead altogether. Before you replace your water-restricted showerhead though, ensure that this is legal in your area. Due to drought issues in some parts of the world, there are restriction on showerhead flows and failure to follow the rules could end up getting you into trouble with authorities.

6. Look for kinks in the water line leading to the shower

These days, many homes have flexible lines running from the valve in the wall to the showerhead. If your shower has a flexible line instead of stiff pipes, you can see it by removing the showerhead and faucet. Then, all you have to do is pull it forward and straighten out any bends or kinks that you find. Alternatively, the water heater in your home is also likely to have a braided line that might be causing problems, so it’s a good idea to check there too.

7. Search for any leaking pipes

Leaking pipes could also be the reason for low shower pressure. In order to track them down, start from the shower and walk back to where the water utility line enters your home. Although plumbing can be tricky to trace once it passes into the walls, you can identify it by looking for dripping water, puddles, or water stains.

8. Call a plumber

In the event that you do find something suspicious or locate a leak, it’s time to call the plumber for help. While you’re waiting for them to come, you can stop the leak by turning off your home’s water supply or by covering it with epoxy putty. If something seems to be going on but you can’t confirm a leak, you can use your water meter to find out. Simply turn off your home’s water valve for a few hours and then check to see if the meter continues to rise.

9. Upgrade your shower

Ultimately, if you’ve tried everything and still aren’t happy with the pressure, you might want to upgrade or replace your shower. One component to consider in your upgrade is a high-quality shower pump. This is a small mechanical device that is fitted to your home water system and uses an impeller, like an aeroplane engine, to boost the pressure of the water before it reaches the shower.